Just Flight DHC-1B-2 CHIPMUNK ‘BUBBLE CANOPY’

Sold by: Just Flight
chipmunk_expansion_esd
chipmunk_expansion_esdchipmunk_bubble_1chipmunk_bubble_3chipmunk_bubble_4chipmunk_bubble_2chipmunk_bubble_5chipmunk_bubble_6chipmunk_bubble_7chipmunk_bubble_8chipmunk_bubble_9chipmunk_bubble_10fsscr847fsscr848fsscr849fsscr852fsscr851fsscr853fsscr855fsscr854
0 5 0 Product
$8.99 ($8.99 excl VAT) each

This DHC-1B-2 Bubble canopy Chipmunk is an expansion for the Just Flight DHC-1 Chipmunk, which must be installed for it to work.

The DHC Chipmunk was designed by engineers at the Canadian offices of the De Havilland Aircraft Company and became the RAF's military trainer of choice in the 1950s.

The Royal Canadian Air Force (RCAF) had their own version designed, with its most distinctive feature being the large two-piece bubble canopy. This disposed of much of the framework of the standard design and provided a much wider field of view which is so essential in the training environment. It stayed in service with the RCAF until 1972.

The model featured in this add-on pack is the DHC-1B-2 and features many other differences apart from the bubble canopy which distinguishes this version.


FEATURES

In addition to the features that come as standard with the DHC-1 Chipmunk pack:


Cockpit

  • Electrical panel is mounted on the top coaming in front of the pilot
  • Electrical panel contains switches for the lights, a starter, battery switch, push-button ID light, retractable landing light switch and a volt meter
  • Bespoke radio unit fitted ahead of the compass on the floor tunnel.
  • Canopy has the appropriate latch system and emergency release mechanism.
  • Primer lever and carburettor heat button are correctly placed
  • Combined oil temperature and pressure gauge
  • Panel carries the appropriate gauges including a fuel pressure gauge
  • Fuel cock is replaced by a Left/Right/Off tank selector
  • Magneto switches are on the top of the fuselage
  • Cockpit/canopy heating system with controls
  • All the flying instruments are appropriate to this model
  • Seats have built-in pull release for the harnesses


Exterior

  • Retractable landing light in port underwing
  • Streamlined navigation lights on wingtips
  • Recognition lights buried in the wingroots.
  • Repositioned ground power connector on fuselage alongside a battery box
  • Hot air exhaust duct and flap under centre fuselage
  • Tail light 
  • First Aid pack on aft fuselage top area
  • Solid framed step-plates mounted on the flap and wing surfaces


Liveries

  • Royal Canadian Air Force – Yellow – ‘035’
  • Civilian – Silver with light blue and red flash - ‘F-CHIP’ 


Other features

  • Manual supplement
  • Authentic flight dynamics for this bubble canopy version, with different power and speed limitations
  • Appropriate checklists

SYSTEM REQUIREMENTS

  • Flight Simulator X (Acceleration, Gold or SP2 required) or Prepar3D v1/v2
  • Just Flight DHC-1 Chipmunk
  • 512MB graphics card
  • Windows 8 / 7 / Vista / XP (32-bit or 64-bit) 
  • 370MB hard drive space
List of the comments:
No comments have been posted yet.
Vote:

Give your advice about this item:

Username:

Customers who bought this product also purchased

  • $59.99 ($59.99 excl VAT) each Just Flight PA-28R ARROW III & TURBO ARROW III/IV BUNDLE
    0 5 0 Product